Process Key points for rubber wood cutting board before use
30 July 04

 rubber wood cutting board (3).jpg

Generally, in order to ensure the healthy use of rubber wood cutting board, it needs to be processed before use, and this treatment mainly has the following two points that need attention. Cutting board manufacturers to introduce everyone.

     1, first with hot water, wash the wax off, this wax is to prevent the wood from cracking. After washing off, it must be soaked in brine for a day. The brine is to boil the water, add salt while hot, and add it until it no longer melts. The purpose of soaking in brine for a day is to impart salt on the surface of the wood. Salt absorbs moisture and prevents the wood from drying and cracking.

     2, after the bubble out, heat a pot of oil, etc., and so cool to 70 ° or so, smear the surface, let stand for a while, then painted, painted several times. When the oil is almost absorbed, dry the oil with paper and the cutting board can be used. However, it should be noted that if the cutting board is not to be used for a long period of time, it must also be painted with oil.